- Unplug the power cord
- Open the lid and check the front on/off switch for burning/melting of the switch and wires.
- Check the back power receptacle switch (Where the power cord plugs into the machine, covered by the small black case on the left side) for burning/melting of the switch and wires.
- Check the 2 jumper wires from the back power receptacle to the back shop vac receptacle for burning/melting of the wire.
- Plug machine directly into the 110 volt wall outlet, ensure the breaker is not tripped.
- View the article on checking voltage within the Black Power Supply Box.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article