-Using a MultiMeter, put the setting to check for continuity. Typically a sideways Wifi symbol. When you touch the two prongs together it should beep or change the reading on the screen.
- Place the 2 prongs on either side of the fuse, and if it beeps then the fuse it good. If there's no noise or change on the meter, the fuse is bad. If it does beep or change the meter, the fuse is good.
Here's an example of the Continuity setting on the multimeter.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article