Check fuse on the front panel near vacuum switch. If fuse is popped or damaged, replace fuse.
If the fuse holder is damaged (Melted, burnt, etc) replace the fuse holder as well as the fuse.
Check the receptacle on the back of machine (power cable connection) for damage (Burnt, Melted, etc). Replace if needed.
If the fuse/holder is fine, check the UV bulb visually. If black/brown, or frosted over, replace the UV bulb (Wear gloves, do not drop or use excessive pressure, these bulbs are delicate).
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article