2G Generator - Replacing the Home Switches

This article will detail how to replace a home switch in a 2G Generator if failure is suspected. 

1. Locate the wiring connector, and taking note of its orientation, disconnect it from the switch.
2. Remove the 2 screws securing the rectangular switch cover.
3. Remove the 3 screws securing the switch to its mount.
4. Taking care to align the switch with its vane, mount the new switch using all 3 screws (Do Not Overtighten.)
5. Remount the switch cover
6. Reconnect the wiring connector.
7. Cut a test lens and calibrate as necessary.